C2G 40973 3x5 Component Video_Digital Audio Matrix Switch w_RS-232 - Manual (Page 7)

5
Allows front panel
switching between
output displays
Controlling the switch from the front panel
1. Press POWER button to turn on the switch.
2.
Press the MODE button to select input mode for all Outputs.
- If the MODE switch is illuminated green,
Outputs 1-5 will display the image and sound from Input 1.
- If the MODE switch is illuminated red,
Outputs 1-5 will display the image and sound from Input 2.
- If the MODE switch is illuminated orange,
Outputs 1-5 will display the image and sound from Input 3.
Power Button Mode Button
3.
Press the Outputs 1-5 buttons on the front of the switch to toggle between the Inputs 1-3
that are being used by your devices.
Example 1 – You would like to route your DVD player connected to Input 3 to Output 1.
Press the Output 1 button until it is illuminated orange.
Example 2 – You would like to route your game console connected to Input 1 to Output 2,
but would like to continue watching the DVD movie from example 1. Press the Output 2
button until it is illuminated green.
Example 3 – You wish to now route materials from your cable box connected to Input 2 to
both displays connected to Output 1 and Output 2. Press the Output 1 button until it is
illuminated red, and repeat for the Output 2.
Turns the matrix
switch on and off
Outputs (1-5) Buttons
Allows front panel
switching between
inputs