Hyundai H-DVD5064 - Manual (Page 12)

H-DVD5064 ( www.hyundai-electronics.ru ) 12
Connection
Precaution: Do not turn on the power of the player before all connections are done correctly.
Note: The diagram may be different from your DVD player; the connections are only for your
reference.
Video system connection
TV/Monitor video input
Component video Composite video and SCART input
input S-video input
Component video Composite video and SCART output
output S-video output
DVD player video output
These video outputs are available in this unit.
Composite video
Use the cable with yellow plug of an AV cable to connect the composite video output of this unit to
the video input of a TV/monitor.
Component video
Use a 3-core AV cable to connect the components outputs of this unit to the corresponding inputs of a
TV/monitor.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-Video input of a
TV/monitor.
SCART
Use a 21-pin SCART cable to connect the SCART output of this unit to the TV/monitor SCART
input.
Notes: The connection you should make depends on the TV/monitor input terminals. Don’t make all
the connections at the same time, otherwise the produced picture will be affected.