Hyundai H-DVD5064 User Manual

Page 17

Advertising
background image

H-DVD5064 (

www.hyundai-electronics.ru

)

17

3D processing (no this setup in 2CH DVD)

In PRO LOGIC On mode, the Reverb mode setup is available. The initial factory setup is Off.

PRO LOGIC II

On means 2CH music switch into 5.1CH music and can by played with multi CHs speakers while in
Off status, no effect, if a disc does not support the function, suggesting to put to the Auto position,
when playing with Dolby digital DVD, the function setting must be put on or put in auto.

MODE

Music: All sound arrive stimulatingly, without delay.
Movie: At the surrounding CH plus 10ms delay.
PRO LOGIC mode imitate PRO LOGIC I adopting logic 2
Auto means auto selecting mode according to a disc type.
Only under audio out status, and 5.1CH being chosen can PRO LOGIC be set. While in PRO LOGIC,
and choosing On can go into next mode menu.

PANORAMA

On means the front stereo extends to both sides, with a better surrounding sense.

DIMENSION

Similar as front and rear balance control, adjusting gradually the front and rear sound field, there are
several musical scale to be chosen.

CENTER WIDTH

Adjusting center CH signal and dividing left/right CH, to let the signal emit from 3 front speakers at
different degree

REVERB MODE

You can select the Reverb mode: Normal, Concert, Living room, Hall, Bathroom, Cave, Arena,
Church.

HDCD

You can select the digital filter Off, 1x, 2x.The initial factory setup is Off.

Karaoke setup

Set the microphone ON or OFF and adjust the microphone volume.

Advertising