Diodes DCX (xxxx) K - Manual

DCX (xxxx) K
Document number: DS30350 Rev. 6 - 2
1 of 12
www.diodes.com
October 2008
© Diodes Incorporated
DCX (xxxx) K
DUAL COMPLEMENTARY PRE-BIASED TRANSISTOR
Features
•
Epitaxial Planar Die Construction
• Built-In Biasing Resistors
•
Available in Lead Free/RoHS Compliant Version (Note 1)
•
“Green” Device (Note 2)
Part Number R1 R2 Marking
DCX124EK 22K Ω 22KΩ C17
DCX144EK 47K Ω 47KΩ C20
DCX114YK 10K Ω 47KΩ C14
DCX123JK 2.2K
Ω 47KΩ C06
DCX114EK 10K
Ω 10KΩ C13
DCX115EK 100K
Ω 100KΩ C15
DCX143TK 4.7K
Ω - C07
DCX114TK 10K
Ω - C12
Mechanical Data
•
Case: SC-74R (Note 3)
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Matte Tin Finish annealed over Copper leadframe
(Lead Free Plating) Solderable per MIL-STD-202, Method 208
• Terminal Connections: See Diagram
•
Marking Information: See Table and Page 11
•
Ordering Information: See Page 11
• Weight: 0.015 grams (approximate)
R
1
R
1
R
2
R
2
C1 B2 E2
E1 B1 C2
R
1
R
1
C1 B2 E2
E1 B1 C2
R1, R2 Device Schematic R1 only Device Schematic
Maximum Ratings NPN Section
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Supply Voltage V
CC
50 V
Input Voltage
DCX124EK
DCX144EK
DCX114YK
DCX123JK
DCX114EK
DCX115EK
DCX143TK
DCX114TK
V
IN
-10 to +40
-10 to +40
-6 to +40
-5 to +12
-10 to +40
-10 to +40
-5V max
-5V max
V
Output Current
DCX124EK
DCX144EK
DCX114YK
DCX123JK
DCX114EK
DCX115EK
DCX143TK
DCX114TK
I
O
30
30
70
100
50
20
100
100
mA
Output Current All I
C(MAX)
100 mA
Thermal Characteristics NPN Section
Characteristic Symbol Value Unit
Power Dissipation (Total) (Note 4) P
D
300 mW
Thermal Resistance, Junction to Ambient Air (Note 4) R θJA 417 °C/W
Operating and Storage Temperature Range T
J
, T
STG
-55 to +150 °C
Notes: 1. No purposefully added lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
3. SC-74R and SOT-26 have identical dimensions and the only difference is the location of the pin one indicator. Please see the individual device
datasheets for exact details regarding the location of the pin one indicator.
4. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 200mW per element must not be
exceeded.
Please click here to visit our online spice models database.