Acer X1270 - Manual (Page 36)

26
En
gl
ish
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
• Press to change the "Administrator Password".
• The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
• An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
• If losing this security card and number, please contact with an
Acer service center.
VGA OUT (Standby) Default is "Off". Choose "On" to enable VGA OUT connection. (for
X1270/X1270Hn/X1170A only)
LAN LAN
Default is "Off". Choose "On" to enable LAN connection. (for
X1270Hn series only)
LAN IP/Mask
Identify IP and Mask address. (for X1270Hn series only)
LAN Reset
Reset LAN function. (for X1270Hn series only)
Reset • Press the button and choose "Yes" to return the
parameters on all menus to the factory default settings.