Acer Altos G540 M2 - Manual (Page 53)

43
Opening the server
Caution: Before you proceed, make sure that you have turned off
the system and all peripherals connected to it. Read the
“Pre-installation instructions” section on page 42.
You need to open the server before you can install upgrade
components. The front bezel and (left) side panel are removable to
allow access to the server’s internal components. Refer to the
following sections for instructions.
Removing the side panel
1 Perform the pre-installation instructions described on page 41.
2 Unlock the security keylock.
3 Remove the two thumb screws on the back panel.
4 Slide the side panel toward the rear of the chassis to disengage it.