Acer Altos R700 - Manual (Page 109)

99
12h Off Off G R Load defaults in CMOS RAM if
bad checksum or CMOS clear
jumper is detected.
12h Off Off G R Initializing APP CMOS RAM for
appliance servers only.
12h Off Off G R Check point After CMOS
Initialized.
27h Off G A G Validate date and time in RTC.
F4h R A R R Load Micro Code To All CPUs.
F6h R A A R Scan SMBIOS GPNV areas.
15h Off G Off A 8254 Timer Test on Channel 2.
15h Off G Off A Enable 8042.
15h Off G Off A Keyboard Reset.
26h Off G A Off Initialize LCD, if supported.
28h G Off R Off Set Video Mode: Initialization
before setting the video mode is
complete. Configuring the
monochrome mode and color
mode settings next.
29h G Off R G Debugger Hook.
2Ah G Off A Off Init PCI devices and
motherboard devices. Pass
control to video BIOS. Start serial
console redirection.
2Bh G Off A G Platform hook.
Post
Code
Diagnostic LED Decoder
Description G=Green,R=Red,A=Amber
MSB LSB
AR700SB-e.book Page 99 Monday, September 30, 2002 9:09 AM