Using the headset, Using a bluetooth headset, Accessories and tips – Acer Liquid MT S120 User Manual

Page 52: Using the headset using a bluetooth headset, Chapter 9: accessories and tips, Creating a new access point

Advertising
background image

52

Chapter 9: Accessories and Tips

This chapter shows you how to use accessories with your smartphone, as well as
provide useful tips for when you are using your smartphone.

Using the headset

Your smartphone comes packaged with a headset with built-in microphone for
handsfree use when making calls, and listening to the radio.
To use the headset, plug it into the 3.5 mm headphone jack at the top of the
phone.
When the headset is plugged in, all audio is routed to the headset, and the
speakers are turned off.
• To answer an incoming call, press the center button on the microphone.
• Adjust the volume using the volume up/down buttons on the

microphone.

Note: Please refrain from speaking while adjusting the volume.

• End the call by pressing the center button again.

Using a Bluetooth headset

Your smartphone’s Bluetooth functions make it fully compatible with all
Bluetooth headsets. This allows you to use the unit handsfree when making
calls, without the inconvenience of wires.

Creating a new access point

When you need to add another GPRS/3G/EDGE connection on your phone,
obtain the access point name and settings (including username and password if
required) from your wireless service provider.
1. Open the application menu and tap Settings > Wireless & networks > Mobile

networks > Access Point Names.

2. Tap the Menu button and tap New APN.
3. Enter the APN settings. Tap an item to adjust it.
4. When you have finished tap the Menu button and tap Save.

Important: Some providers and countries do not allow the use of a smartphone as a
modem over HSDPA. Please check with your provider before attempting to do so.

Advertising