Xylem CHATTER RTU and E-mail - Manual (Page 27)

USERS MANUAL
CHATTER™ DATA LOGGER
27
Mounting in the field
You will need a set of wedges for mounting the tube mount model in the end of a vertical tube. MJK Automation
ApS supplies two different sets of wedges to fit tubes with different inner diameter.
MJK Item Description
521751 Set of wedges for the Chatter™ Data Logger tube
mount model. Contains wedges number 1, 2, 3 and 4.
Set # Minimum diameter Maximum diameter
1 61 mm 70 mm
2 68 mm 76 mm
3 76 mm 83 mm
4 83 mm 90 mm
512751 Set of wedges for the Chatter™ Data Logger tube
mount model. Contains wedges number 4, 5 and 6.
Set # Minimum diameter Maximum diameter
4 83 mm 90 mm
5 89 mm 97 mm
6 97 mm 105 mm
The wedges have a straight and a chamfered edge, the
chamfered edge must be towards the groove in the black
aluminium casting, the straight edge must be towards the
inside of the tube.
This wedge is mounted the right way round, there is no gap
between the groove in the black aluminium casting and the
wedge.
This wedge is mounted the wrong way, there is a visible gap
between the groove in the black aluminium casting and the
wedge.