Safety advice, Getting started – AEG HM6200 User Manual

Page 13

Advertising
background image

Safety advice

Read the following instruction

carefully before using the appliance for

the first time.
• This appliance is not intended for use

by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.

Do not allow children to use the

appliance without supervision.

• Children should be supervised to

ensure that they do not play with the
appliance.

• The appliance may only be connected

to a power supply whose voltage
and frequency comply with the
specifications on the rating plate!

• Never use or pick up the appliance if

– the supply cord is damaged,
– the housing is damaged.

• If the appliance or the supply cord

is damaged, it must be replaced by
the manufacturer, its service agent or
similarly qualified person, in order to
avoid hazard.

• Always disconnect the appliance from

the supply if it is left unattended and
before assembling, disassembling or
cleaning.

• Never release the accessories while

the appliance is running.

• Avoid contact with moving parts.

Contact could result in injury!

• Do not immerse the appliance in

water or any other liquid.

• The mixer can be used continuously

for up to 3 minutes. Then allow to

cool for at least 20 minutes. When

processing heavy load, do not use

the appliance continuously for more

than 30 seconds. Allow to cool down

before restarting.

• This mixer is equipped with a thermal

fuse which operates if the motor
is overheating. If the mixer has
overheated and stopped working
please diconnect and allow to cool
down for at least 1 hour before using
the mixer again.

• Do not use this appliance to stir paint.

Danger, could result in an explosion!

• This appliance is intended for

domestic use only. The manufacturer

cannot accept any liability for possible
damage caused by improper or
incorrect use.

Getting started

3. Before removing whisks or hooks,

unplug the handmixer. Then hold the
device firmly with one hand, while
pressing the eject button.

1. Before first use, be sure to clean

whisks and dough hooks. Before
inserting or removing them from
hand mixer unit, always remove plug
from power outlet.

2. Push whisks or dough hooks into

accessory slots underneath the mixer,
until they click into place. The dough
hook or whisk with larger ring fits only
into the wider slot.

GB

GB

13/16

D
GR
NL
F

GB

Advertising
This manual is related to the following products: