AEG HM6200 - Manual (Page 14)

Operating instructions
3. During use, you can put the mixer
vertically, but make sure the speed
selector is at the “0” position.
When mixing is complete set the
speed selector to the “0” position and
remove the plug.
1. The mixer can be used continuously
for up to 3 minutes. Then allow to
cool for at least 20 minutes. Use a
standard plastic mixing bowl and
amounts not exceeding 1.5 kg solid
foods or 1.75 l liquids. Warning!
due to risk of injury never touch
running whisker or hooks with
either tools or fingers.
2. Select the speed by moving speed
selector. Select and hold at the “+”
(TURBO) setting for highest speed.
When the “+” (TURBO) is released, the
speed selector will return to the “0”
position. LED light will indicate the
mixing speed. Always start at low
speed then increase.
Settings and troubleshooting
Setting Stepless Speed Selector
Kneading Use the highest speed
Mixing start with the lowest speed and increase to MAX 50% of total speed
Folding in Start with the lowest speed and increase to MAX 50% of total speed
Stirring Use the highest speed
Whisking, Frothing Use the highest speed
Start processing at low speed to avoid powdery foods and liquids spraying out.
Troubleshooting
The handmixer is not working Make sure the appliance is plugged in and that all accessories are correctly assembled.
If the handmixer is still not working, contact the customer service.
14/16
GB
GB
+