John Wood Takagi - 710 - Manual (Page 32)

32
6. Wall thimble with Termination: TK-KPWL4 and TK-KPWH4
Louver
Termination
TK-KPWL4
Hood
Termination
TK-KPWH4
These terminations are used when venting out through the wall and are com-
patible with the T-Vent pipe system. These terminations are special stainless
steel vents for gas appliances and are UL listed as Category II, III and IV.
There are two types of terminations: the Louver termination and the Hood
termination. For different wall thicknesses, there are two ranges of lengths
available (refer to the venting brochure for details). Install these vent termina-
tions in accordance with the manufacturer’s installation instructions and any
applicable local codes