Specifications, Reference material, Video – Extron Electronics 3G HD-SDI 101 User Guide User Manual
Page 12: Video input, Video output
3G HD-SDI 101 • Reference Material
Reference Material
8
Specifications
Video
Gain ................................................. Unity
Resolution....................................... 8 or 10 bits, automatic
Operation Standards ..................... SMPTE 259M, SMPTE 292M,
SMPTE 424M, ITU-R BT.601,
ITU-R BT.1120
Auto data rate lock ........................ Yes
Video input
Number/Signal Type.................... 1 single link SDI, HD-SDI, or 3G-SDI
digital component video
Connectors ..................................... 1 female BNC
Data rates ........................................ 19 Mbps to 2.97 Gbps
Input cable equalization ............... Automatic for up to -30 dB of cable loss
HD-SDI, 3G-SDI ................ 120 m (400') using Extron RG6 cable
60 m (200') using Extron RG59 cable
SDI ....................................... 150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable
N
Transmission distance varies depending on the signal
resolution and on the type of cable, source, and display
used in the system.
Nominal level ................................ 0.8 Vp-p
Minimum/maximum levels ........ 0.5 V to 1 Vp-p with no offset
Impedence ...................................... 75 ohms
Return loss ...................................... <-15 dB @ 5 MHz to 2.97 GHz
DC offset (max. allowable)........... 5 V
Input coupling ............................... AC
Video output
Number/Signal type .................... 1 single link SDI, HD-SDI, or 3G-SDI
digital component video
Connectors ..................................... 1 female BNC
Re-clocking ..................................... Automatic for 270 Mbps, 1.485 Gbps,
2.97 Gps, or bypassed for other rates
Nominal level ................................ 0.8 Vp-p
Minimum/maximum levels ........ 0.5 V to 1 Vp-p
Impedence ...................................... 75 ohms
Return loss ...................................... <-25 dB @ 100 MHz
DC offset ......................................... ±5 mV with input at 0 offset