Extron Electronics BUC 102 - Manual (Page 13)

BUC 102 • Installation and Operation
Unbalanced Input
Tip
Sleeve
Tip
Sleeve
Balanced Input
LR LR
Tip
Ring
Sleeve (s)
Tip
Ring
5 Bal/Unbal output DIP switch — In general, match the DIP
switch setting to the output wiring to achieve unity gain. The
following table shows the gain settings associated with the DIP
switch options and the corresponding output wiring
configuration when the front panel gain controls are adjusted to
the unity gain position. See “Front Panel Features” in this
chapter.
Output Wiring
DIP Switch Setting Unbalanced Balanced
Unbalanced 0dB +6dB
Balanced -6dB 0dB
9