Xoro HTL 2231D - Manual (Page 72)

20 HTL 2231D
Engl
ish
First Time Installation
When you start the HTL 2231D TV set the first time and choose TV or DTV, than appears the
installation guide on the screen. With this guide you can search analogue and digital TV channels.
The search routine includes the frequencies of the analogue and digital broadcaster.
1.
Please select the OSD language. You can
choose the pre-installed languages by
pressing the ◄ or ► buttons. If you find your
languages, please confirm the language by
pressing the OK button.
2. Press the ▼ button and navigate to the option
„Auto Tuning“. The search starts when you
press the ► button.
3. A new popup window appears on the screen.
There you can see the option country
selection. Please choose the suitable country
by pressing the ◄ or ► buttons.
4. If you had chosen the country, please press
the ▼ button, so that the „Start“ field will be
marked with blue and is active. Press the OK
button and the search starts immediately.
5. A new window opens on the screen, where
the status of the searching is documented.
The values of the found TV broadcast stations
of analogue, digital and Radio are listed.
6. After finishing of the searching, all found TV
broadcast station will be saved into the
channel list.
7. You can look at the TV channel list by
pressing the CH.LIST button.
Note:
The complete searching needs a couple of minutes.