Extron Electronics DSC 301 HD User Guide User Manual
Page 19
Output Submenu
This submenu allows the user to configure the output.
Figure 8.
OSD Menu — Output Submenu
Resolution — Select this to change the resolution and refresh rate for the connected
output display (see
HDMI Format — Select this to set the HDMI output format. Choices are :
•
Auto — (based on sink EDID), default
•
DVI RGB 444
•
HDMI RGB 444 Full
•
HDMI RGB 444 Limited
•
HDMI YUV 444 Full
•
HDMI YUV 444 Limited
•
HDMI YUV 422 Full
•
HDMI YUV 422 Limited
HDCP Notification — Select this to turn HDCP Notification on (default) or off.
The HDCP Notification provides a means of determining if HDCP content restrictions
are preventing a video signal from passing. The DSC 301 HD has the ability to notify the
user that they are currently trying to view HDCP protected content through a non-HDCP
compliant HDMI or DVI display. The options presented to the user during this scenario are
the ability to show a green screen with a moving “OSD bug” reading “HDCP CONTENT,”
or to disable this message, and instead output muted (black) video on non-HDCP
compliant displays.
Figure 9.
Green HDCP Notification Screen
DSC 301 HD • Operation
13