Extron Electronics DXP HDMI User Manual
Page 103
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software
97
•
Ties
as
Crosspoints
— Displays ties as a matrix of inputs and outputs. Current ties
that have been made are indicated by amber boxes.
•
To create a tie, click in a crosspoint box. A
+
sign appears briefly in the box you
clicked, indicating a tie has been formed.
•
To break a tie, click on the desired amber (tied) box. A
–
sign appears briefly and
the amber fill is cleared from the box.
Figure 97.
Ties Shown as Crosspoints
•
Signal-detection
options
— Provides a submenu that allows you to set the input
signal detection (DSVP) feature to do one of the following:
•
Automatically refresh the display every 10 seconds.
•
Sample the sync and update the display whenever you make a configuration
change (
On
Demand
or
by
Refresh
).
•
Never sample and display the sync or no sync status (
None
).
•
Limit
ties
to
same
group
— Allows you to create ties only between inputs and
outputs that are in the same group (similar to front panel operation).
•
Icons
in
I/O
boxes
— Displays icons that you place in the I/O boxes in the matrix
on the previous page).