Rack mounting procedure – Extron Electronics DXP HDMI User Manual
Page 130
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Reference Information
124
124
•
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
•
Circuit overloading — When connecting the equipment to the supply circuit,
consider the connection of the equipment to the supply circuit and the effect that
circuit overloading might have on overcurrent protection and supply wiring. Consider
equipment nameplate ratings when addressing this concern.
•
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct
connections to the branch circuit (such as the use of power strips).
Rack Mounting Procedure
The DXP matrix switchers are housed in rack-mountable metal enclosures with mounting
flanges for standard 19-inch racks. If desired, mount the DXP switcher as follows:
1.
Insert the switcher into the rack, aligning the holes in the mounting flanges with those
in the rack.
2.
Secure the switcher to the rack using the supplied bolts and washers.
Figure 118.
Rack Mounting the DXP to a 19-inch Rack