Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 74)

SNMP Settings Page
NOTES:
• Simple Network Management Protocol (SNMP) is an internet-standard protocol for
IT personnel to manage devices on an IP network. It is not the intent of this guide to
define SNMP further than this and this section is intended for users who are familiar
with SNMP protocol.
• The matrix switcher can report alarm events via an SNMP trap, providing simple
integration with network management systems (NMS).
• When communicating using SNMP and generating SNMP traps (alarms and
notifications), the matrix switcher complies with the requirements of SNMP v2c.
• IT personnel — Contact the S3 Sales & Technical Support Hotline to get all
Extron-specific Management Information Base (MIBs). See the contact numbers on
the
last page of this guide for the Extron office nearest you.
Reach the SNMP Settings page (see figure 42) by clicking the SNMP Settings link on the
System Settings page. The SNMP Settings page has fields for establishing the general
SNMP settings and fields to establish SNMP monitoring and optional traps.
Figure 42. SNMP Settings Page
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation 68