Extron Electronics HDXP Plus Series User Guide - Manual (Page 96)

HDXP Plus Series Switchers • Matrix Software 90
3. From the Initialize Emulated Matrix Settings From window, select an emulation file
(.mtx extension), and click
Open .
Figure 88. Selecting an Emulation File
NOTE: Selecting the Demo.mtx file provides a sample of a completed matrix
setup. Selecting the New.ini file or clicking Cancel provides a blank setup to get
you started.
4. On the Save Emulated Matrix Settings window, enter a file name under which you
want to save any changes to the file, and click
Save .
Figure 89. Saving a New Emulation File