Extron Electronics MS9400 HD FrEND - Manual (Page 21)

MS9400 HD FrEND User Guide Chapter 2: Player Controls and Set-Up
21 Rev. 1.54
• PID Search options are:
User Define – When PID is known, select User Define and use the scroll bars in the
windows at the bottom of the display to enter the necessary PIDs. PID information must
match that of the files in use; PIDs are set during file encoding process.
Read From Index File – PIDs are read from a pre-written Index File
Search From Stream – PIDs are read directly from the video file; this process will take
a certain amount of time.
System
Navigate to and click on the System menu button. The following screen appears:
NOTE: The HD FrEND Serial Number and Software Version Number is displayed at the top of the System
Display page.
These settings are necessary for synchronization of the MS9400 to the calendar/clock in a central control system;
such as when using in a network controlled by ESCAN and for running the Event Scheduler.
• Date – Set the Day/Month/Year
• Time – Set the clock to Hours:Minutes:Seconds
• Enable Scheduler – Check/Uncheck box
1. Navigate the windows with the joystick and press <SELECT> to highlight the segment you wish to edit
2. Click on the Up/Down scroll to change the values in the respective windows.
3. Click the Set Clock button when complete
4. Click the Enable Scheduler check box to turn the Serial Port Event Scheduler On or Off. If you un-check
the box any Scheduler Script that may be running on the MS9400 will stop. When not using the Event
Scheduler ignore this setting.
Refer to Chapter 4: RS232 (Serial) Port Event Scheduler for information on how to use the scheduler feature.
Refer to Chapter 6: Remote Control Protocols for command syntax.