Extron Electronics MS9400 HD FrEND - Manual (Page 42)

MS9400 HD FrEND User Guide Chapter 6: Remote Control Protocol
42 Rev. 1.54
Audiooff <Channel list>
Mute the audio on the requested channel.
The Player will respond with
OK or ERROR
Loopon <Channel list>
Enable the Auto repeat mode. Channel will loop (auto-repeat) at the end of the selected files in the playlist.
The Player will respond with
OK or ERROR
Loopoff <Channel list>
Turn off the loop flag for the requested channel.
The Player will respond with
OK or ERROR
Setsmoothmode
Sets the Player into ‘Smooth’ transition mode.
Use this setting to smoothly transition between files in a Playlist comprised of MPEG files having the same PID
(recommended). NOTE: This setting can be accessed with the IR Remote as well.
The Player will respond with
OK or ERROR
Setnormalmode
Sets the player into ‘Normal’ transition mode.
Use this setting to allow the HD FrEND to process a Playlist comprised of files with differing PIDs (there will be
a slight delay between the end of one file and the beginning of the next). NOTE: This setting can be accessed with
the IR Remote as well.
The Player will respond with
OK or ERROR