Extron Electronics MSX1616HR - Manual (Page 24)

22
MSX1616 OPERATION MANUAL - v1.0 5/8/02

2002 - INLINE, INC.
Resetting the Switcher
1. Press MENU until
0DLQ 0HQX displays in the LCD.
2. Press the soft key pointing to
$GYDQFHG.
Result:
$GYDQFHG 0HQX displays in the LCD.
3. Select the soft key pointing to
5HVHW 8QLW.
Result:
5HVHW 0HQX displays in the LCD.
4. You can do either a partial reset or a full reset.
a. To do a partial reset, press the soft key pointing to
3DUWLDO 5HVHW.
Result: The switcher resets the RS232 serial port, opens all input/output patches,
resets all volume levels, sets all outputs to un-mute state, and removes any
address given to the unit.
i. Press ENTER to reset.
ii. Press MENU to exit.
b. To do a full reset, press the button pointing to
)XOO 5HVHW.
Result: The switcher resets the RS232 serial port, opens all input/output patches,
resets all volume levels, removes any address given to the unit, and clears all
saved presets and labels. This process may take up to 2 minutes, if all presets are
used.
i. Press ENTER to reset.
ii. Press MENU to exit.
Activating RGB Delay
This feature allows older model projectors (or a series of projectors) time to synchronize their
signals so the image pops cleanly and clearly onto the screens. Set RGB delay for up to 6
seconds.
1. Press MENU until
0DLQ 0HQX displays in the LCD.
2. Press the soft key pointing to
$GYDQFHG.
Result: Advanced Menu displays in the LCD.
3. Select the soft key pointing to
5*% 'HOD\.
Result:
5*% 'HOD\ 7LPH displays in the LCD.
4. Use either the up-and-down or the left-and-right menu navigation buttons to set the RGB
delay time.
5. Press ENTER to accept the changes.
6. Press MENU to exit.