Extron Electronics MTP DA8 User Guide - Manual (Page 18)

Control/remote — distribution amplifier
Contact closure (latching)
MTP DA4 ................................. (1) 3.5 mm captive screw connector, 6 pole for contact closure output mute
control
MTP DA8 ................................. (1) 3.5 mm captive screw connector, 10 pole for contact closure output mute
control
Contact closure pin configurations
MTP DA4 ................................. 1 = mute output 1, 2 = mute output 2, 3 = mute output 3, 4 = mute output 4,
5 = mute all outputs, 6 = GND
MTP DA8 ................................. 1 = mute output 1, 2 = mute output 2, 3 = mute output 3, 4 = mute output 4,
5 = mute output 5, 6 = mute output 6, 7 = mute output 7, 8 = mute output 8,
9 = mute all outputs, 10 = GND
General
Recommended cable type .............. Enhanced Skew-Free ™ AV UTP Cable or CAT 5/5e/6 (shielded or unshielded)
Power supply .................................. External
Input: 100-240 VAC, 50-60 Hz
MTP DA4 ................................. 12 VDC, 1 A, regulated
MTP DA8 ................................. 12 VDC, 1 A, regulated
Power input requirements
MTP DA4 ................................. 12 V, 0.6 A
MTP DA8 ................................. 12 V, 0.9 A
Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling .......................................... Convection, no vents
Mounting
Rack mount ............................. Yes, with optional 1U rack shelf
Furniture mount ...................... Yes, with optional under-desk mounting kit
Pole mount .............................. Yes, with optional pole mounting kit
Enclosure type ................................ Metal
Enclosure dimensions ..................... 1.75" H x 8.75" W x 6" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight ............................... 1.2 lbs (0.5 kg)
Shipping weight ............................. 4 lbs (2 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ...................................... CE, c-UL, UL
EMI/EMC ................................. CE, C-tick, FCC Class A, ICES, VCCI
Environmental ................................ Complies with the appropriate requirements of RoHS, WEEE
MTBF ............................................. 30,000 hours
Warranty ........................................ 3 years parts and labor
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
MTP DA4 and MTP DA8 • Reference Information 12