Extron Electronics VSC 300_300D User Guide - Manual (Page 19)

2-9 VSC 200/200D/300/300D Installation
Cable Connector Pin Assignments
Mac-HV/VGA cable
Figure 11 shows the pin locations on the 15-pin connectors at opposite ends of the
Mac-HV/VGA cable that is used for connecting a computer to the scan converter.
Figure 11 — VGA (HD15) and Mac (DB15) connector pin locations
The table below lists signals and their pin assignments for the
VGA (15-pin HD) and Mac (15-pin D) connectors of this cable.
VGA Pin Function Mac Pin
1 Red video 2
2 Green video 5
3 Blue video 9
4 ID bit 4
5 ID bit 8
6 Red ground 1
7 Green ground 6
8 Blue ground 13
9 Not used —
10 Composite & vertical sync gnd 11, 14
11 ID bit 7
12 ID bit 10
13 Horizontal sync 15
14 Vertical sync 12
15 ID bit/composite sync 3
VGA/13W3 cable
Figure 12 shows the pin locations on the 13W3 and 15-pin connectors at opposite
ends of the VGA/13W3 cable that is used for local monitor loop-through
(VSC 300/300D).
Figure 12 — 13W3 and VGA (HD15) connector pin locations
The table on the next page lists signals and their pin assignments for the 13W3 and
VGA (15-pin HD) connectors of this cable.
5 1
15 11
8 1
15 9
6 10
DB15 Connector
Male
HD15 Connector
Male
1 5
6 10
A2 A3 A1
13W3 Connector
Female
5 1
15 11
6 10
HD15 Connector
Male