Extron Electronics SWP123 - Manual (Page 40)

SWP123 Presentation Switcher • Remote Control
Remote Control, cont’d
5-12
4. Press and release the ENT (ENTER) button to execute the switch.
Resetting the component code
If, for any reason, the component device code is erased, reset the code with the
following instructions:
1. Press and release the S (set) button.
2. Press and release the SWP SWITCHER button.
3. Enter the component’s three digit code number using the numeric buttons
001
.
4. Press and release the ENT (ENTER) button to store the code.