Extron Electronics YCS SW2 A User Guide - Manual (Page 17)

YCS SW2 A • Specifications, Part Numbers, and Accessories
Specifications, Part Numbers, and Accessories
YCS SW2 A • Specifications, Part Numbers, and Accessories A-2 A-3
Stereo channel separation ............ >80 dB @ 1 kHz
Audio input
Number/signal type ..................... 2 stereo, unbalanced
Connectors ..................................... 4 RCA female
Impedance ...................................... >12k ohms unbalanced, DC coupled
Nominal level ................................ -10 dBV (316 mVrms), unbalanced
Maximum level .............................. >+12 dBu, unbalanced at 1% THD+N
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0dBV 2dBu
Audio output
Number/signal type ..................... 1 stereo, unbalanced
Connectors ..................................... 2 RCA female
Impedance ...................................... 50 ohms unbalanced
Maximum level (Hi-Z) ................. >+12 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm) ........... >+10.5 dBu, unbalanced at 1% THD+N
Nominal level ................................ -10 dBV, unbalanced
Control/remote
Contact closure .............................. 1 female 3.5 mm captive screw connector,
3 pole
Contact closure pin configurations
1 = input 1, 2 = input 2, 3 = GND;
shorting pins 1, 2, and 3 together =
autoswitch selection
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 1 A max.,
regulated
Power input requirements ........... 12 VDC, 0.4 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling ........................................... Convection, unvented
Rack mount .................................... Yes, with optional RSU 129 or RSB 129 1U,
9.5" deep rack shelf, part #60-190-01 or
60-604-01; RSU 126 or RSB 126 IU, 6" deep
rack shelf, part #60-190-10 or 60-604-10; or
RSU 123 or RSB 123 VersaTools
® rack shelf,
part #60-190-20 or 60-604-20
Specifications
Video
Gain ................................................ Unity
Bandwidth ...................................... 5 MHz (-3 dB)
Crosstalk ......................................... -60 dB @ 3.58 MHz
Switching speed ............................ 5 ms (max.)
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, PAL-N,
SECAM; autodetected
Video input
Number/signal type ..................... 1 S-video, 1 composite video
Connectors ..................................... 1 female 4-pin mini DIN and 1 female
BNC
Nominal level ................................ 1 Vp-p for Y of S-video and for composite
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p for video and Y
with no offset at unity gain
Impedance ..................................... 75 ohms
Return loss ..................................... -34 dB for composite video, -27 dB for Y,
-31 dB for C @ 5 MHz
DC offset (max. allowable)........... 5.0 V
Input coupling ............................... AC coupled
Video output
Number/signal type ..................... 1 S-video, 1 composite video
Connectors ..................................... 1 female 4-pin mini DIN for S-video
1 female BNC for composite video
Nominal level ................................ 1 Vp-p for Y of S-video and for composite
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.3 V to 1 Vp-p for video and Y
Impedance ..................................... 75 ohms
Return loss ..................................... -40 dB @ 3.58 MHz
DC offset ......................................... ±300 mV with input at 0 offset
Audio
Gain ................................................. Unbalanced output: 0dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.5 dB
THD + Noise .................................. <0.04% @ 1 kHz at nominal level
S/N .................................................. >90 dB at maximum output (unweighted)