Imetec SILENT POWER COMPACT - Manual (Page 17)

EN
15
CLEANING THE OUTLET FILTER (17)
• Press the interlock of the outlet filter grille (16) and remove the outlet filter (17) [Fig. G8].
• If the outlet filter (17) is clogged with dust, wash it carefully with cold water. Take care
not to damage it and let it dry completely.
• Refit the outlet filter (17) in the appliance [Fig. G8].
• Refit the outlet filter grille (16) and snap the interlock in place.
ATTENTION!
Let the filter dry for at least 24 hours after washing it. Do not reinstall the
filter if it is damp!
REPLACING THE HEPA FILTER (14E)
• Remove the dust collection system from the appliance [Fig. G4].
• Remove the Hepa filter (14E) from the support and replace it with a new filtering insert
[Fig. G7].
• Refit the appliance and insert the dust collection system before restarting it.
REPLACING THE OUTLET AIR FILTER (17)
• Press the interlock of the outlet filter grille (16) and remove the outlet filter (17). Replace
it with a new one [Fig. G8].
• Refit the outlet filter grille (16) and snap the interlock in place.
STORING AND CARING FOR THE PRODUCT
NOTE:
• A safety device does not allow the dust collection system to be inserted (14) in
the appliance if the Hepa filter (14E) is missing.
• Replace the filters if damaged or impossible to be thoroughly cleaned.
• Replace the filters at least once a year.
• Failure to comply with the filter cleaning or replacing operations will render the
manufacturer’s warranty null and void.
TROUBLESHOOTING
PROBLEM SOLUTION
The appliance does not turn on • Ensure that the plug is connected to the socket.
• Make sure the ON/OFF button has been pressed .
The appliance turns off during
use and does not turn on again
• The vacuum cleaner is equipped with a protective motor
thermostat that shuts off the appliance in the event of
overheating (caused by passageway obstruction or clogged
dust collection system)!
• If triggered, switch the appliance off by pressing the ON/OFF
switch , disconnect the plug from the socket and let it cool
down completely for a few hours.
• Remove any dust or obstructing objects before restarting the
appliance.
MI000956_corretto.indd 15 18/12/2012 17:36:11