Imetec INTELLIVAPOR ECO - Manual (Page 13)

EN
11
• After having removed the appliance from its packaging, verify its integrity based on
the drawing and any presence of damage caused by transport. If in doubt, do
not use the appliance and contact an authorised service centre.
• Do not let children play with the packaging! Keep the plastic bag out of the
reach of children - risk of suffocation!
• Before connecting the appliance, please make sure that the voltage data
indicated on the identification technical data correspond to those of the mains
voltage. The identification technical data are found on the appliance.
• This appliance must be used solely for the purpose for which it was designed,
namely, as a boiler iron for home use. Any other use is considered not compliant
and therefore dangerous.
• If the appliance if faulty or malfunctions, switch it off and do not tamper with it.
Any repairs must only be carried out by an authorised technical service centre.
DO NOT use the appliance with wet hands, damp feet or barefoot.
DO NOT pull the power cable or the appliance itself to remove the plug
from the socket.
DO NOT expose the appliance to humidity or weather conditions (rain,
sun).
• If the power cable is damaged it must be replaced by an authorised technical
service centre, so as to prevent all risks.
• The electrical safety of this appliance is only guaranteed when it is connected
correctly to an effective earthing system as required by applicable electrical
safety standards. This important safety requirement must be verified and, if in
doubt, request a thorough check of the system by a qualified technician.
DO NOT immerse the iron, the power cord or the plug in any kind of
liquid.
DO NOT leave the hot iron in contact with easily flammable fabric.
DO NOT dispense steam when the iron is resting on its mat.
DO NOT use chemical additives, scented substances or descaling
agents.