Imetec SENSUIJ MC1-200 - Manual (Page 40)

35
ASSEMBLY/PREPARATION
• Unpack the product.
• Check that it is integral and undamaged.
• Connect the transformer to the massager pillow: insert connector (5) into connector socket.
• Connect the mains power supply (4) to the domestic mains.
ATTENTION!
The massager pillow is unsuitable for use in a car.
USE
• Position the massager on the shoulders as in fig.2.
• Pull the handles as in Fig. 2 so that the massager adheres well to the shoulders and neck.
• Press the POWER button (2) once to turn the massager pillow on. The corresponding LED will turn on.
Two types of massage can be selected:
• SHIATSU
• STONE
SHIATSU
• Press the SHIATSU button to activate the cervical massage.
• Press it again to deactivate it.
STONE
• Press the STONE button to activate the vibration massage.
• Press it again to deactivate it.
Note: The two massages, SHIATSU and STONE, can be selected simultaneously.
HEAT: heating function.
• Press the HEAT button to activate heat during the massage.
• Press it again to deactivate it.
Note: the HEAT function can be activated only after having activated the SHIATSU or STONE
massage.
• Press POWER again to turn the massager pillow off.
• After 15 minutes of treatment it is advisable to rest for at least 20 minutes.
• Disconnect the plug after use.
AUTOMATIC SHUTDOWN
The massager pillow turns itself off automatically after 15 minutes. This function does not replace the normal
turning off of the product, which must be off when not in use.
MAINTENANCE AND STORAGE
Always disconnect the appliance from the mains supply before cleaning or maintenance and when the
appliance is not in use.
The massager can be cleaned with a soft slightly damp cloth. It is also possible to use a light detergent.
Keep the massager out of children’s reach in a cool dry place. Keep it in the original packaging. Avoid contact
with pointed or sharp objects which can damage the appliance.
EN