Imetec SENSUIJ MC1-200 - Manual (Page 41)

36
PROBLEMS AND SOLUTIONS
These appliances are built with the highest standards. No parts can be repaired by the user. If the appliance
does not work, follow the solutions.
If other situations not included above should occur, pull out the plug, wait a few minutes, put the plug back in
and turn the appliance back on.
Should the appliance keep on having problems, contact the authorised assistance centre.
DISPOSAL
The product packaging consists of recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The product must be disposed of properly, in accordance with the provisions of European standard
2002/96/EC. The device is made of recyclable materials that can be re-used to avoid environmental
pollution. For further information, contact the local disposal body or the appliance dealer.
SERVICE AND WARRANTY
To request repairs or purchase spare parts, please contact IMETEC’s customer assistance service by
calling the free-phone number below (only in Italy) or consulting the website. The appliance is covered by the
manufacturer’s warranty. For details, read the attached warranty sheet.
Failure to comply with the use and maintenance instructions provided in this user manual will invalidate all and
any rights to the manufacturer’s warranty.
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
MI000386
0810 (MMYY)
Problem Possible cause Solution
The appliance makes noise
during use. This is evitable, but the
appliance is not faulty. It does not affect the duration of the
appliance.
Noise during the massage grows.
Has it been used for too
long without interruption? Turn the appliance off and have it rest
for over an hour.
Irregular right or left movements
of massager pillow mechanism.
It is structural. It is not an alteration.
It does not move or else it stops
during the massage.
The timer stopped the
appliance.
Press the start button again.
Is the plug still in the
socket?
Insert the plug in the socket.
Is the switch on? Turn the appliance on.
Has the appliance turned
off for excessive weight?
Remove the weight and wait a few
minutes. The appliance will turn back
on.
EN