IPX DDK-1800 - Manual (Page 6)

1. DESCRIPTION
1.1 PHYSICAL DESCRIPTION
1 2 3 4 5 6 7
8
9
10
1. Power Input:
DC 12V input connects to an external power supply.
2. Power Input: AC 24V input connects to an external power supply.
3. ETHERNET 10/100 Connector:
Standard RJ-45 connector for 10/100 Mbps Ethernet
networks. PoE (Power over Ethernet) function: Provides power to the device via the same
cable as used for the network connection.
4. AUDIO IN: Connector is used to connect the audio output from other devices to the
DDK-1800D.
5. VIDEO OUT Connector:
Connector provides Composite video output
6. AUDIO OUT: Provides DDK-1800D audio signal to an external device.
7. GPIO:
6-PIN connector for digital I/O, DC output and GROUND for connecting with external
devices.
8. USB port: Connects DDK-1800D to a USB port on a Computer.
9. SD/ SDHC CARD slot:
Used for updating system software and archiving video.
10. RESET: Reset to factory default. (Refer to section 1.4 The Reset Button.)
6