IPX DDK-1700D - Manual (Page 37)

37
1. Click the PPPoE button on the upper left menu to enter the “PPPoE Settings” page.
2. Activate
the “Enable” or “Disable” status of the PPPoE Settings.
3. Enter the PPPoE
“Username” and the PPPoE “Password” then confirm the password again.
4. Click on the Submit button to save the setting.
NOTE: Please refer to section 4.1.3.8 (PPPoE & DDNS) for more details.
Functions:
PPPoE Setting If you use the DDK-1700D to connect directly to the Internet, you will need
to enter the username and password which were given to you when you
set up your account with your Internet Service Provider. If the DDK-1700D
is behind a router or a gateway you do not need to configure this setting.
Username: Enter Username here
Password: Enter Password here