IPX DDK-1700D - Manual (Page 65)

65
when an event is triggered.
5. Click “Submit” to save or click on “Don’t Submit” to go back to the Event main page.
Event settings:
(1) Click Add in the Event area on Event Settings page to open the Event setting page. On
this page, you can configure three settings: Trigger, Event Schedule, and Action to set an
event. A total of 3 different event settings can be configured.
(2) Enter the Event Name for the event setting.
(3) Select “Enable this event” option to enable the event setting.
(4) Set the event p riority from: “normal”, “high” and “highest”. Events with a higher priority will
be executed first.
(5) Enter the duration in seconds to restart motion detection after a motion is detected
(6) An event is the action initiated by the user-defined trigger source. Set the event details for
each as follows.

Trigger: This option defines when to trigger the DDK-1700D. The trigger source
can be configured to use the DDK-1700D
’s built-in motion detection , periodic,
external digital input devices, or system boot:
(a) Video motion detection: This option makes use of the built-in motion
detection mechanism as a trigger source. To enable this function, you need
to first configure a motion detection windows.
(b) Periodic: This option allows the DDK-1700D to trigger periodically as
defined in minute intervals up to 99999 minutes.
(c) Digital input: This option allows the DDK-1700D to use an external digital
input device or sensor as a trigger source.
(d) System boot: This option triggers the DDK-1700D when the power to the
DDK-1700D is disconnected.
 Event Schedule: Specify the period for the event.
(a) Select the days of the week.