Magimix MINI PLUS - Manual (Page 6)

Place the bowl on the motor unit with the
handle to the left hand side.
Before using your appliance for the first time, wash all the parts thoroughly
(except the motor unit)
Place the chosen attachment in the bowl
(see details on following page).
Turn the lid in an anti-clockwise
direction until the locking device clicks
into position at the top of the handle.
Position the lid, completely flat, by
placing the feed tube to the left of the
handle.
Turn the bowl anti-clockwise as far as
it will go making sure it firmly locks into
position. The handle will now be at the
centre of the motor unit.
FITTING THE ACCESSORIES FITTING THE BOWL
W A R N I N G
Double failsafe : the machine will
only work if both the bowl and the
lid are correctly locked into position
1 2
3
5
4
To slice: place the disc with its slicing
blade facing upwards.
Lower the support, fitted with a disc, onto
the motor shaft in the centre of the bowl.
Put the lid on and lock into position.
To grate: Place the disc with its grating
blades facing upwards.
Blender
m
ix: for use with the main
blade. For small quantities place it in the
bowl otherwise position it in the lid".
Discs: place the selected disc on
the support, turning it gently in an
anti-clockwise direction.
Please be careful when handling the blades and disc as they are
extremely sharp.
!
6
7 6
Stainless steel blade: place the blade
directly in the bowl, over the motor shaft.
Put the lid on, and lock into position.