Andrew James AJ000577 Milk Frother with Shaker and Wall Mount - Manual (Page 3)

3
Appliance components diagram
Attaching the wall holder
1. Mark two holes in the wall where you want to mount the wall holder.
2. Drill two small holes into the marked area with a 5mm drill.
3. Place a wall plug into each of the holes.
4. Fix the wall holder into the wall using screws.
Filling the chocolate shaker
1. To fill the chocolate shaker ,first press the button on the side of the shaker and
remove the lid.
2. Fill the chocolate shaker with cocoa powder.
3. Return the lid to its previous position by lining the button with the hole and
pressing down on the lid to secure it into place.
Chocolate shaker lid
Release button
Release hole
Chocolate shaker
Wall mount
Screw & wall plugs
Motor housing
Shaft
Frothing whisk
Release button
On/Off button