Andrew James AJ000577 Milk Frother with Shaker and Wall Mount User Manual

Page 4

Advertising
background image

4

Using the milk frother

1.

Clean the appliance thoroughly before use, refer to the “Cleaning and
maintenance” section of the manual.

2.

Fill a container a third full (jugs can be purchased at
www.andrewjamesworldwide.com).

3.

Hold the milk frother by the motor housing and plunge the frothing whisk into
the liquid.

4.

Switch the power button to “On”, the milk frother will now begin to froth the
milk.

5.

When you are happy with the amount of froth that has been produced press the
button to the “off” position.

6.

Place the appliance to one side.

Tips for frothing

For cappuccinos pour coffee into the already frothed milk slowly or alternatively
spoon the milk into the coffee adding a little at a time.

When making milkshake always add the powder into the milk first before
frothing.

Cleaning and maintenance

Clean the appliance after every use to prevent a build up of bacteria and
deposits of residues.

Always ensure the appliance is switched off before cleaning.

Only the shaft and frothing whisk can be immersed in water, never immerse the
motor housing in water, instead clean it with a damp cloth and dry thoroughly.

Store the milk frother in a dry, safe place. It is ideally best stored on the wall
mount.

Advertising