Andrew James AJ000055 Power Juicer User Manual
Page 7
7
Assembly
1.
Place the motor section (6) onto a flat stable surface. Make sure the speed
dial (11) is facing towards you.
2.
Fit the spout support (7) into the motor section (6).
3.
Clip the centrifugal bowl (4) into the spout support (7). A “clicking” sound
will signal it has been correctly assembled.
4.
Carefully place the funnel (2) onto the top of the spout support (7). Ensure
that the clips of the funnel (2) fit into the spout support (7) slots.
5.
Raise the locking mechanism (10) and firmly lock it into place on the funnel
(9).
6.
Attach the fruit pulp holder (8) under the lip of the funnel (2). Raise it at an
angle then slide the bottom in place.
7.
Place the jugs lid on top of the jug (3) and place it underneath the spout.
8.
Plug the appliance power cord into the electrical socket.
9.
Turn the appliances speed dial (11) to 1.
10.
Place the ingredients into the funnel (2) and press the ingredients down into
the centrifugal bowl using the plunger (1). Increase the speed to 2 if
necessary.