Andrew James AJ000302 Deluxe Barbeque Grill - Manual (Page 10)

10
Electrical information
Please note:
It is extremely important that the wires or cores in the flex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured
markings identifying the terminals in
your plug proceed as follows:

The Live (Brown) wire connects
to the right- most live (L)
terminal nearest to the fuse.

The Neutral (Blue) wire
connects to the left-most
neutral (N) terminal.

The Earth (Green and Yellow)
wire connects to the central,
top most earthed (E) terminal.
Warning: If the appliance is double
insulated indicated by the double insulated symbol:
it should not have an
earth wire or earth connection.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same identical rating as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualified electrician.
Please note after replacing the fuse, ensure that the cover is correctly fitted back
onto the plug. Never attempt to run the appliance if the plug does not have a cover.
If a moulded plug is fitted and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent it from engaging into a
socket.
If the supply cord is damaged it must be replaced by a service agent or a similarly
qualified person in order to avoid a hazard.