Andrew James AJ000302 Deluxe Barbeque Grill - Manual (Page 7)

7
Assembling the appliance

Unpack all the components.

To use the BBQ with the lower tray insert the tray insert into the slots of the
lower legs and secure them using the screws (12) and the nuts (13)
provided*.

Attach the 4 lower legs (14) with the feet attachments into the lower tray
(11) so that the feet are resting on the ground.

Attach the 4 remaining upper legs (10) into the top of the lower tray (11) in
the allotted holes.

Slot the base rack (8) onto the upper legs (10)

Place the aluminium reflector tray (7) inside of the base rack (8) so that it
rests flat and is secure in the allotted space.

Clip the side trays (9) into the base rack (8) in the appropriate sides of the
rack.

Fill the aluminium reflector tray (7) with water to the level indicated between
the minimum and maximum mark.

Fit the heating element (2) into the front of the base rack (8) so that the
thermostat (3) is facing the correct way and the plug is free from any other
components.

Add the heating grill (1) on top of the base rack.

Fit the wind shield (15) into the back of the base rack (8) ensuring the 4
points are clipped into place.

Additionally add the cooking rack into the wind shield (15) so that the food
can be rested before serving.
*If you wish to just use the BBQ without the lower tray follow steps 6-12, ensuring
that the BBQ is rested on a flat, secure and heat resistant surface.
Caution! Never use the appliance without water in the reflector tray, always
ensure that the water level is between the minimum and maximum marks.
Caution! When adding water to the reflector tray, always make sure the water