Andrew James AJ000285 6 Day Pet Feeder - Manual (Page 10)

10
Notes & FAQ:

When the bowl is rotating both the clock setting and mode setting are not
allowed.

Under clock display mode the colon icon (:) will flash. The colon icon (:) is
turned Off when in feeding timer mode.

A PM icon will be displayed in the afternoon under 12-hour clock mode
and turned off in the AM. The PM icon will not be displayed under 24 hour
clock mode.

In feeding timer mode, three numbers will show up, the first number is the
feeding number (1,2,3,4,5 or 6) and last two digits indicate the feeding
time in hours.

When the feeding timer starts, the BELL icon will turn On. Under feeding-
timer display mode a solid BELL icon means the feeding time has already
passed. A flashing BELL icon means the feeding time has not been
reached. This lets the user know how many feedings are left for feeding.

If the time for the next feeding is set earlier than the present feeding time,
the feeding will start the next day.

If the Mode key is pressed and held for more than 2 seconds the number
will rapidly increase automatically until you release the key. When number
reaches its maximum, the number will fall back to the minimum value and
start increasing again.

If the feeding timer has already begun, pressing the START key will reset
the timer and begin again from the 1
st
feeding-time set.

If START TOMORROW key is pressed, both the BELL and Zz icon will be ON.
The Zz icon will turn OFF at 0:00 midnight to indicate the timer has
started.

START TOMORROW is used should you want to set your feeder up today
and have it start tomorrow. This is good for when you have programmed
feeding times that have yet to pass so you can prepare in advance for a
possible trip or just being away the next day and not wanting the feeder to
run the day you programmed it.