AEG EWA7500 - Manual (Page 16)

Getting started
8. To boil water then keep it warm at
selected temperature:
1. Press the Keep warm button to
select the keep warm temperature. 2.
Then press the Power button.
This function will switch off after 30
minutes. Then the buzzer will buzz.
7. To heat water to selected
temperature (not boiling):
1. Press the Temperature selection
button to select temperature. 2. Then
press the Power button.
When the selected temperature is
reached, the kettle will automatically
switch off.
1. Before cleaning, always unplug the
appliance. Never rinse or immerse
the kettle or base unit in water. Just
wipe with a damp cloth, using no
abrasive detergents. Occasionally
rinse out the kettle with clean water.
2. To clean the mesh filter, grab the
strainer insert and lift out.
Cleaning the heating plate –
superficial spots of rust may appear
on the base unit. Remove with a
stainless steel cleaning agent.
3. Decalcifying is recommended
regularly, depending on water
hardness. Fill the kettle with
water and decalcifier according to
decalcifier product instructions.
Do not boil the solution as it may
foam over. Afterwards, rinse kettle
thorougly with fresh water.
Cleaning
9. To heat water to selected
temperature (not boiling) and keep
it warm.
1. Press the Temperature selection
button to select temperature. 2. Then
press the Keep warm button. 3. Then
press the Power button.
This function will switch off after 30
minutes. Then the buzzer will buzz.
16/20
GB
1
3
2