SM Pro Audio CT-3: Multi-format automatic Cable tester - Manual (Page 3)

FOREWORD
Dear Customer,
Thank you very much for expressing your confidence in SM ProAudio products
by purchasing this unit. The CT-3 has been designed to be used as a standard
tool for home/pro studios, P.A. rental companies, Schools and in many other
situations where audio products would be used. With much experience in the
audio industry over a long period of time, and along with valuable suggestions
from our customers, our engineers have developed a product we know you will
be satisfied with. We guarantee you uncompromising quality as well as
excellent technical and audio properties at an extremely affordable price.
Regards,
SM ProAudio
INSTALLATION
Your SM ProAudio CT-3 was carefully packed in the factory and the packaging
was designed to protect the unit from rough handling. Nevertheless, we
recommend that you carefully examine the packaging and its contents for any
signs of physical damage, which may have occurred in transit.
+ If the unit is damaged, please do not return it to us, but notify your dealer and
the shipping company immediately, otherwise claims for damage or
replacement may not be granted. Shipping claims must be made by the
consignee.
PLACEMENT
The SM ProAudio CT-3 utilizes an electronic circuit. Be sure that there is
enough air space around the unit for cooling. As to avoid overheating, please do
not place the units on high temperature devices such as power amplifiers or
near other units which may have high frequency transmittance such as wireless
devices.
Mains voltage
The CT-3 does not use any mains voltages, it only uses 9V DC batteries one
per side of the CT-3. Please be aware that if batteries are left unused in the unit
they make leak after a while and cause damage to the unit, make sure that if
you are not using the CT-3 for a long period you disconnect or remove the
battery.
S
M
P
R
O
A
U
D
IO
c
t
-
3