SM Pro Audio CT-3: Multi-format automatic Cable tester - Manual (Page 4)

SM CT-3 Main Features
-8-position Automatic indication cable tester
-Allows connection between different format connectors with ease
-'Banana' connector continuity tester with beeper and LED indicator
-Super rugged construction for durability and long life
-2 x DMX (5-pin)
-2 x BNC
-2 x RCA Phono
-2 x XLR
-2 x MIDI (5-pin DIN)
-2 x Speakon
-2 x Banana
-2 x 1/4" (6.5mm) TRS/TS
-2 x Rj45
-2 x RJ11
1. INTRODUCTION
How can you test a long Multicore or a cable which is inside a wall?
How can you test a cable which you cannot access both ends of to connect,
with a normal cable tester?
For years this solution has been available for normal CAT5 and network cables.
The CT3 brings this new technology to the audio world and now you are able to
test cables which are already pre-installed or at different parts of a building. The
CT3 has a vast number of audio connectors on it as well as RJ45 (CAT5 and
CAT6) RJ11 (Telephone).
2. THE DESIGN CONCEPT
2.1 High quality components and design
The philosophy behind SM ProAudio products guarantees a no-compromise
circuit design and employs the best choice of components.
2.2 Inputs and outputs
All inputs and outputs are secured firmly to the exterior chassis housing. This
ensures robust quality and confidence in performance under all conditions.
As the CT3 TRS (1/4”) inputs are STEREO if you are using a TS
jack (MONO) please only insert it into theCT3 until the first lock for
the TIP of the JACK is engaged. If you insert a TS connector all the
way, your will see the LED’s on the receive unit DIM as the Ring
and Sleeve are shorted buy the Jack being used.
IMPORTANT NOTE:
S
M
P
R
O
A
U
D
IO
c
t
-
3