Safety instructions table of contents a. unpacking – NXG Technology NX-BAS-500 User Manual

Page 2

Advertising
background image

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l’intérieur d’un triangle équilatéral est utilisé

pour alerter l’utilisateur de la presence à l’intérieur du coffret de “voltage dangereux”

non isolé d’ampleur suffisante pour constituer un risque d’éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the user

of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est employé pour alerter

les utilisateurs de la présence d’instructions importantes pour le fonctionnement

et l’entretien (service) dans le livret d’instruction accompagnant l’appareil.

1. Read Instructions – Read all the safety and

operation instructions before operating the NX-

BAS-500 (subwoofer).

2. Retain Instructions – Keep the safety and

operating instructions for future reference.

3. Heed Warnings – Follow all warnings on the

subwoofer and in these operating instructions.

4. Follow Instructions – Follow all operating and

other instructions.

5. Water and Moisture – Do not use the sub-

woofer near water for example, near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet base-

ment or near a swimming pool.

6. Heat – Locate the subwoofer away from heat

heat sources such as radiators, or other devices

that produce heat.

7. Power Sources – Connect the NX-BAS-500

only to a power supply of the type described in

these operation instructions or as marked on the

subwoofer.

8. Power Cord Protection – Route power supply

cords so that they are not likely to be walked upon

or pinched by items placed upon or against them,

paying particular attention to cords at plugs, conve-

nience receptacles, and the point where they exit

the NX-BAS-500.

9. Object and Liquid Entry – Do not drop objects

or spill liquids into the inside of the subwoofer.

10. Damage Requiring Service – The NX-BAS-500

should be serviced only by qualified service per-

sonnel when:

A. NX-BAS-500 power supply cord or the plug

has been damaged; or

B. Objects have fallen, or liquid has spilled in

the NX-BAS-500; or

C. NX-BAS-500 has been exposed to rain; or

D. NX-BAS-500 does not appear to operate or

exhibits a marked change in performance; or

E. The NX-BAS-500 has been dropped, or its

chassis damaged.

11. Servicing – Do not attempt to service the

subwoofer beyond those means described in this

operating manual. All other servicing should be

referred to the qualified service personnel.

12. To prevent electric shock, do not use the

NX-BAS-500 polarized plug with an extension

cord, receptacle or other outlet unless the

blades can be fully inserted to prevent blade

exposure.

Pour préevenir les chocs électriques ne pas

utiliser cette fiche polariseé avec un prolongateur,

un prise de courant ou une autre sortie de

courant, sauf si les lames peuvent être insérées à

fond sans laisser aucune pariie à découvert.

13. Grounding or Polarization – Do not defeat the

grounding or polarization of the subwoofer.

14. Internal/External Voltage Selectors – Internal

or external line voltage selector switches, if any,

should only be reset and re-equipped with a prop-

er plug for alternate voltage by a qualified service

technician.

15. Cleaning – Clean with a dry cloth only.

16. Where the mains plug or an appliance coupler

is used as the disconnect device, the disconnect

device shall remain readily operable.

This apparatus does not exceed the Class A/

Class B (whichever is applicable) limits for radio

noise emissions from digital apparatus as set out

in radio interference regulations of the Canadian

Department of Communications.

ATTENTION – Le présent appareil numérique

n’émet pas de bruits radioélectriques dépassant las

limites applicables aux appareils numériques de

class A/de class B (selon le cas) prescrites dans le

règlement sur le brouillage radioélectrique édicté par

les ministere des communications du Canada.

WARNING – To reduce the risk of fire or electric

shock, do not expose this component to rain

or moisture.

C

ongratulations on your purchase of an NXG

NX-BAS-500 powered subwoofer. It will give

your stereo, or home theater system unparal-

leled low frequency output.
Bass frequencies are critical to realistic sound

reproduction. After you’ve hooked up your NX-

BAS-500 subwoofer, you’ll discover just how

much “punch” and depth you’ve been missing.

No matter what kind of music or videos you lis-

ten to... whether you listen to it loud or soft, you’ll

experience sound that’s richer and fuller. Bass

guitar and string bass will have more impact.

You’ll be able to FEEL as well as hear percus-

sion – just the way you would at a live perfor-

mance. If you have an audio/video system,

movies will come alive with thunderous sound

effects that were never possible without the NX-

BAS-500.
The NX-BAS-500 is a self-powered subwoofer

that frees your receiver or power amplifier from

the power demands of reproducing very low

frequencies. To do this, the NX-BAS-500 incor-

porates its own built-in crossover system that

automatically “assigns” lower frequencies to its

own power amplifier, contained within the sub-

woofer enclosure.
The NX-BAS-500 has been meticulously

designed and tested to insure high perfor-

mance, durability and longevity.
This manual is designed to take you step-by-

step through the hook-up and operating

process. This procedure is not difficult, but it IS

slightly different than hooking up a line level

component such as a cassette deck or DVD

player. Reading this manual carefully will

insure that you get maximum performance

from your NX-BAS-500.

2

A. UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . 2

B. AMPLIFIER PANEL TOUR . . . . . . . . . . . . . . 3

C. PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . 4

D. CONNECTIONS . . . . . . . . . . . . . . . . . . . . . 4

E. INITIAL LISTENING TESTS . . . . . . . . . . . 7

F. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . 8

G. TROUBLESHOOTING & SERVICE . . . . . . 8

H. WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . 8

SAFETY INSTRUCTIONS

TABLE OF CONTENTS

A. UNPACKING

Remove the NX-BAS-500 from its packing

carefully and inspect it for any shipping damage.

If you discover damage, contact your NXG deal-

er or installer immediately.
If possible, save the carton and internal pack-

ing. It’s the best possible protection for your

NX-BAS-500 if you need to move it or return it

for service.
Keep your sales receipt in a secure place. It

helps establish the duration of your warranty

and is good for insurance purposes (just in case

anything happens to your stereo/home theater

system).

Advertising