NXG Technology NX-WRLS1 - Manual (Page 3)

+ – + –
+ – + –
+ – + –
+ – + –
+
–
+
– +
–
+
–
Powering the Transmitter:
Power Supply: Size AA x 4 or included SAA listed AC adaptor 120V-DC9V
1. Open the battery compartment on the bottom of the transmitter.
2. Insert four AA batteries in the direction shown.
3. Replace the battery compartment cover.
Powering the Speaker:
Power Supply: Size C x 8 or included SAA listed AC adaptor 120V-DC12V
1. Open the battery compartment on the bottom of the speaker.
2. Insert eight C batteries in the direction shown.
3. Replace the battery compartment cover.
4. Or attach the AC/DC adaptor labeled SPEAKER to the DC12V jack at right side of
the speaker.
5. Press the power button ON at the top of the speaker.
AC120V - DC12V