Powering the transmitter (continued), Wired listening, Listening wirelessly – NXG Technology NX-WRLS1 User Manual
Page 4
Powering the Transmitter (continued):
4. Or attach the AC/DC adaptor labeled TRANSMITTER to the DC9V jack at right side
of the transmitter.
5. Press the power button ON at the front of the transmitter.
Wired Listening:
You may connect any audio device such as an MP3, CD or DVD player, cable box, or TV.
1. Locate the AUDIO OUT jack on your selected audio device.
2. Connect the device to the AUDIO-IN jack on the side of the speaker using the
supplied cables.
3. Make sure the volume of the source device is set to 50% maximum.
4. Turn on the speaker and adjust the volume to a suitable level.
Listening Wirelessly:
Note: Please refer to the QUICK-START GUIDE included with this product for detailed
instructions on connecting the transmitter to most commonly-used audio devices.
You may connect any audio device such as an MP3, CD or DVD player, cable box, or TV.
1. Locate the AUDIO OUT jack on your selected audio device.
2. Connect the device to the AUDIO-IN jack on the transmitter.
3. Make sure the volume of the source device is set to 50% maximum.
4. Turn on the transmitter and speaker and adjust the volume to a suitable level.
MP3
Audio Device
TV/DVD
Audio Device
R
(Red)
L
(White)