AAEON PCM-5895 Rev.B - Manual (Page 30)

C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B
Chapter 2 Quick Installation Guide 2-17
I/O Resource Allocation Method of PC/104 card is for the PCM-5895
Rev.B.
PC/104 connector at the PCM-5895 Rev.B cannot automatically get related
I/O resource when a new PC/104 card is added because of AMD Geode’s
architecture limitation. The following steps are for setting up the I/O
resources manually for your reference.
1.
Retrieve the resource of the PC/104 card. The information is
typically contained in the manual of the PC/104 card.
2. Push a function key “Delete” to get into the BIOS
3. Enable the resource of the device in BIOS setup
4. Disable the resource of the device for which conflicts the resource of
the device mentioned above in BIOS setup
5. Save above BIOS setup and restart the system
6. Install the driver in the operating system
Open your Control Panel (click Start, then pick Setting and Control Panel)
Double click on the System icon and choose the Device Manager tab.
Find the device of which you want to enable. Click the plus sign (+)
next to the various categories click on the device you want to update,
and then click on “Resource” and choose the resource that is the same
as the hardware setup.
2.20 ATX Power Socket (CN10)
Pin Signal Pin Signal
1 +3.3V 11 +3.3V
2 +3.3V 12 -12V
3 GND 13 GND
4 +5V 14 PS-ON
5 GND 15 GND
6 +5V 16 GND
7 GND 17 GND
8 NC 18 -5V