AAEON PCM-5895 Rev.B - Manual (Page 54)

C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B
Chapter 4 Driver Installation 4 - 6
4.5 Installing PCI to ISA Bridge Driver
Win XP / Win XPe System
Place the Driver CD-ROM into your CD-ROM drive and follow the
following steps to install.
1. Click on Start button
2. Click on Settings button
3. Click on Control Panel button
4. Click on System button
5. Select Hardware and click on Device Manager…
6. Double click on Other PCI Bridge Device
7. Click on Update Driver…
8. Click on Next
9. Select Search for a suitable driver…, then click on Next.
10. Select Specify a location, then click on Next
11. Click on Browse
12. Select “Ite” file from CD-ROM (Driver/Step 3- PCI to ISA
Bridge ) then click on open
13. Click on OK
14. Click on Next
15. Click on Finish