AAEON EPIC-CV01 Series - Manual (Page 38)

3-8 EPC-CV1 Series
Power On By Ring [Disabled]
[Disabled]
Disables Ring to generate a wake event.
[Enabled] Enables Ring to generate a wake event.
3.4.5 Panel Controller (AMD ® GPU only)
Backlight Brightness Setting [75]
Allows you to set the backlight brightness. Select a larger number for a brighter
backlight. Configuration options: [0] [25] [50] [75] [100]
3.4.6 DIO Function
GPIO 1~8 [Input]
Allows you to configure the digital signal of the GPIO (General Purpose Input/
Output) pins 1~8. Configuration options: [Input] [Output High] [Output Low]
3.4.7 North Bridge LVDS Config Select (AMD ® GPU only)
LVDS Panel Config Select [1024x768]
Allows you to configure the resolution for the LVDS panel. Configuration options:
[800x600 18bit] [800x480 18bit] [1024x768 24bit] [1280x800 18bit] [1280x1024
48bit] 1440x900 48bit] [ 1680x1050 48bit] [1920x1080 48bit]
EDID Panel Option [Enabled]
Enables or disables the EDID panel. Configuration options: [Enabled] [Disabled]
3.4.8 Onboard Devices Configuration
Onboard WLAN [Enabled]
[Enabled]
Enables the onboard wireless LAN / WiMAX.
[Disabled] Disables the onboard wireless LAN / WiMAX.
Onboard Audio [Enabled]
[Enabled]
Enables the onboard audio controller.
[Disabled] Disables the controller.
RS Mode [RS232]
Allows you to configure the serial communications standard of serial port (COM) 1.
Configuration options: [RS232] [RS422] [RS485]
Onboard LAN [Enabled]
[Enabled]
Enables the Realtek LAN controller.
[Disabled] Disables the controller.